logo m2m do Brasil sistemas de ultrassom phased array para ensaios não destrutivos END
M2M ndt France phased-array technologies for non destructive testing NDT


M2M
 
tecnologia em phased-array

MULTIX++

PAUT equipment for industrial NDT application

UNCOMPROSIDED PERFORMANCES

for HIGH-SPEED INSPECTION

M2M_3D Gek view

FAST mode

One advantage using a MultiX ++ full parallel system is the possibility to fire several apertures simultaneously on one or several probes improving greatly the productivity of an inspection.

 


 

PARALLEL SYSTEMS

SEVERAL APERTURES FIRED SIMULTANEOUSLY


For a 128-element system, up to 4 sub-apertures can be fired in parallel leading to gains in productivity of nearly x4 with no compromise on the resolution. The following illustration shows the example of four sub-apertures fired simultaneously using the fast mode interface.



 
 
 

INDUSTRIAL APPLICATION

HIGH SPEED COMPOSITE INSPECTION


A carbon epoxy plate was inspected with a MultiX++ system using the new Multi2000 V8 version. Thanks to the parallel architecture of the MultiX++, two sub-apertures were fired in parallel with a 64-element probe. A substantial improvement (x2) of the inspection speed, up to 400mm/s, has been obtained with a pixel resolution of 0.5x0.5mm, including full A-Scan storage. Multi2000 V8 is linked directly to CIVA Analysis for powerful post-processing, analysis and 3D visualization of defects.


Multi2000 V8 version for NDT



Spec MultiX++ Phased array ultrasound for NDT MultiX++ Phased array ultrasound for NDT


MULTIXpp  PAUT equipment for industrial NDT application
 

> Overview

> Surface Adaptive Ultrasound

> FAST mode

> Applications

> Customer Support



MULTIX++ full parallel architecture M2M

 


M2M ndt Youtube channel