logo m2m do Brasil sistemas de ultrassom phased array para ensaios não destrutivos END
M2M ndt France phased-array technologies for non destructive testing NDT


M2M
 
tecnologia em phased-array

Fastener-hole inspection in pulse-echo mode  


The goal of the work was to use simulation in order to determine the resolution capabilities of a “daisy” probe used for the inspection of fastener holes. The concept is to put the probe on top of the test specimen and to look for cracks that tend to radiate out from the fastener holes. Using CIVA, several inspection strategies (varying the number of elements used and their delay laws) were investigated (see Figures below).



Ensaios não destrutivos END phased array M2M do BrasilThe client’s industrial constraints included the size, cost and resolution of the probe, which affected the number of elements that could be used in the probe design. The simulation results allowed the tradeoffs among cost, size and performance to be evaluated, along with the characteristics of the radiated beam.

Beam simulation when all elements of the probe are fired in parallel. An horizontal slice of the radiated acoustic beam centered at 20mm depth is illustrated.


 



daisy probe - fastener hole inspection

Beam simulation using 8 elements at a time. In this case a multiplexed configuration is used to perform electronic scanning by sequentially firing groups of 8 elements. The beam profile and a horizontal slice of the radiated acoustic beam centered at 20mm depth are illustrated (left and right pictures, respectively).

Download